Q2. (a) Based on Figure 2(a) below, configure Network Address Translation (NAT) on both R0 and R1 so that it will enable

[answerhappygod]

Q2 A Based On Figure 2 A Below Configure Network Address Translation Nat On Both R0 And R1 So That It Will Enable 1 (88.08 KiB) Viewed 20 times

Q2. (a) Based on Figure 2(a) below, configure Network Address Translation (NAT) on both R0 and R1 so that it will enable PCO to access to all four Web Servers with the designated URL shown in Figure 2(b). Assume that all IP interface and routes are properly configured as in Figure 2(c). (8 marks) 192.168.1.1/24 192.168.1.2/24 192.168.2.1/24 Server-PT Web Server 1 Fa0/3 Server-PT Web Server 2 Fa0/1 200.1.1.1/24 Server-PT Web Server 3 Fa0/0, Fa0/1, Fa0/0, 1841 192.168.1.254/24 192.168.2.2/24 Fa0/2 RO 295F80/1 SwitchU Server-PT Web Server 4 PC-PT PCO URL http://200.1.1.1 http://200.1.1.1:8000 http://200.1.1.1:8080 http://200.1.1.1:9000 Web Server/Router Interface Fa0/0 of RO Fa0/1 of RO Fa0/0 of R1 Fa0/1 of R1 Web Server 1 Web Server 2 Web Server 3 Web Server 4 Fa0/4 Fa0/2 192.168.1.3/24 2950-24 Switch1 Figure 2 (a) Figure 2 (b) Figure 2 (c) Fa0/2 Fa0/1, 2950-24 Switch2 1841 192.168.2.254/24 R1 Fa0/1 Web Servers Web Server 1 Web Server 2 Web Server 3 Web Server 4 IP address 192.168.1.254 200.1.1.1 192.168.1.3 192.168.2.254 192.168.1.1 192.168.1.2 192.168.2.1 192.168.2.2 Fa0/3