CTU WEBSITE Name Date of birth Surname CONTINUUM MECHANICS The closed vessel is filled with air of mass m. In the vessel

[answerhappygod]

Ctu Website Name Date Of Birth Surname Continuum Mechanics The Closed Vessel Is Filled With Air Of Mass M In The Vessel 1 (42.45 KiB) Viewed 9 times

Ctu Website Name Date Of Birth Surname Continuum Mechanics The Closed Vessel Is Filled With Air Of Mass M In The Vessel 2 (33.14 KiB) Viewed 9 times

Ctu Website Name Date Of Birth Surname Continuum Mechanics The Closed Vessel Is Filled With Air Of Mass M In The Vessel 3 (27.95 KiB) Viewed 9 times

CTU WEBSITE Name Date of birth Surname CONTINUUM MECHANICS The closed vessel is filled with air of mass m. In the vessel there is an absolute pressure pe and a temperature a, heat is subsequently supplied to the gas in the vessel. Consider the air as an ideal gas. Consider the state change reversible. m=250 g; p = 180 kPa ; n = 20°C: Q=4500); r= 287 kg 1-K-1;*= 1.4 Write the temperature in the vessel after heating [°C] t2 = [°C] Write the pressure pe in vessel after heating [kPa] P2 = [kPa] There is a straight beam of rectangular cross-section c x 2c of length, which is rotary supported at one end (A), at the other end (B) slidably supported and at point Cloaded by a Tho hoam is made of a material with yield strength o which we
Write the pressure puin vessel and P2 [kPa] There is a straight beam of rectangular cross-section ex 2c of length, which is rotary supported at one end (A) at the other end (B) slidably supported and at point Cloaded by a solitary force F as shown. The beam is made of a material with yield strength ox, which we consider to be ideally elastic plastic (for an approximation according to Prandt, see the picture) 1 A с 2.4 <= 30 mm: 300 mm x 200 N mm Choose the size of the plastic modulus of the cross-section in bending W. We W, W .. Write the value of the limit plastic force mein [N], when the limit state of plasticity will be reached (formation of a plastic mechanism). Filmit = [N] FACULTY OF MECHANICAL ENGINEERING
CTU Na Suman Date of birth PART OF MACHINES, TECHNOLOGY and MATERIALS Taylor's relation is expressed by: OT T OT- When programming CNC machine tools, the following are used: Preparatory G-functions and auxiliary M-functions. Trigonometric and logarithmic functions. Main M-Function and secondary G-function. Technical standards. The gear with front straight teeth is given m1 mm (modulus) 2 = 21 (number of pinion teeth) 1-3.1 (gear ratio) = +0.1 = -0.1 (displacement coefficients) Determine the number of teeth of the large wheel, 22 Determine pitch cirde diameter , in [mm] [mm] FACULTY OF MECHANICAL ENGINEERING ADMISSION EXAMS TO THE FOLLOWING MASTER'S STUDY FOR THE ACADEMIC YEAR 2021/2022