Page 1 of 1
QA) An intermediate shaft of a gearbox, supporting two spur gears B and C, and mounted between two bearings A and D, is
Posted: Wed Apr 27, 2022 7:31 pm
by answerhappygod
- Qa An Intermediate Shaft Of A Gearbox Supporting Two Spur Gears B And C And Mounted Between Two Bearings A And D Is 1 (44 KiB) Viewed 99 times
QA) An intermediate shaft of a gearbox, supporting two spur gears B and C, and mounted between two bearings A and D, is shown in Figure 1. The pitch circle diameters of gear B and C are 400 and 200 mm respectively. The shaft is made of alloy steel 20 MnCr5. (Sut= 620 MPa and Syt = 480 MPa). The factors ko and kt of the A.S.M.E. code are 2.0 and 1.5 respectively. The gears are keyed to the shaft. The permissible angle of twist for the shaft is 0.25° per meter length and the modulus of rigidity is 79.3 GPa. Determine the shaft diameter on the basis of torsional rigidity. 200 200 F,-F, tan(205 200 416 1144 D Figure 1: Gearbox intermediate