After performing a wireless site survey, you determine that to achieve proper HR-DSSS coverage within the rooms along a

[answerhappygod]

After performing a wireless site survey, you determine that to achieve proper HR-DSSS coverage within the rooms along a hallway area, the AP radios that service the hallway must be at 12 mW or higher. After the APs are all installed, you note that RRM is decreasing the power on the AP radios in the hallway to 6 mW. Which two methods can you use to prevent the
HRDSSS AP radio power levels from dropping below 12 mW? (Choose two.)

A. Configure the minimum power-level assignment for the 2.4 GHz radio to 11 dBm under the individual TPC settings on the hallway APs.
B. Configure the minimum power-level assignment for the 5 GHz radio to 11 dBm under the individual TPC settings on the hallway APs.
C. Configure the minimum power-level assignment to 11 dBm under the global 802.11b/g/n TPC settings.
D. Configure the minimum power-level assignment to 11 dBm under the global 802.11a/n TPC settings.
E. Statically configure the 5 GHz radios on the hallway APs to power level 4.
F. Statically configure the 2.4 GHz radios on the hallway APs to power level 4.