In a bridge-to-bridge setup, the network administrator wants to allow only the root bridge the ability to associate to t

[answerhappygod]

In a bridge-to-bridge setup, the network administrator wants to allow only the root bridge the ability to associate to the non-root bridge. To achieve this goal, the administrator decides to implement a MAC filter. If 0017.dfa6.cdf0 is the MAC address of the root AP (ROOT_AP) and 0017.dfa6.ae13 is the MAC address of the non-root AP (NON-ROOT_AP), which command set will achieve this goal?

A. ROOT_AP# configure terminal ROOT_AP(config)# access-list 700 permit 0017.dfa6.cdf0 ROOT_AP(config)# dot11 association mac-list 700
B. NON-ROOT_AP# configure terminal NON-ROOT_AP(config)# access-list 700 permit 0017.dfa6.cdf0 NON-ROOT_AP(config)# dot11 association mac-list 700
C. NON-ROOT_AP# configure terminal NON-ROOT_AP(config)# access-list 700 permit 0017.dfa6.ae13 NON-ROOT_AP(config)# dot11 association mac-list 700
D. NON-ROOT_AP# configure terminal NON-ROOT_AP(config)# access-list 700 permit 0017.dfa6.cdf0 NON-ROOT_AP(config)# dot11 ssid bridge NON- ROOT_AP(config-ssid)# dot11 association mac-list 700
E. ROOT_AP# configure terminal ROOT_AP(config)# access-list 700 permit 0017.dfa6.cdf0 ROOT_AP(config)# interface Dot11Radio0 ROOT_AP(config-if)# dot11 association mac-list 700