Lab -VTP Configuration -
A new switch is being added to the River Campus LAN. You will work to complete this process by first configuring the building_210 switch with an IP address and default gateway. For the switch host address, you should use the last available IP address on the management subnet. In addition, the switch needs to be configured to be in the same VTP domain as the building_100 switch and also needs to be configured as a VTP client. Assume that the IP configuration and VTP configuration on building_100 are complete and correct.
The configuration of the router is not accessible for this exercise. You must accomplish the following tasks:
- Simulation Lab 1 (5.26 KiB) Viewed 49 times
- Simulation Lab 2 (52.54 KiB) Viewed 49 times