The IP address range for your on-premises network is 11.11.0.0/16. Inter-server communication is restricted to IP addresses within this network range. The cloud has been assigned the IP address range 11.11.253.0/24.
You must create a VPC in AWS. Through a VPN connection, the servers inside the VPC should be able to interact with hosts on the Internet and on-premises.
Which configuration steps best fit your requirements? (Select two)
A. Set up the VPC with an IP address range of 11.11.253.0/24. Most Voted
B. Set up the VPC with an RFC 1918 private IP address range (e.g., 10.10.10.0/24), and set up a NAT gateway to do translation between 10.10.10.0/24 and 11.11.253.0/24 for all outbound traffic.
C. Set up a VPN connection between a VGW and an on-premises router, set the VGW as the default gateway for all traffic, and configure the on-premises router to forward traffic to the Internet. Most Voted
D. Set up a VPN connection between a VGW and an on-premises router, set the VGW as the default gateway for traffic destined to 11.11.0.0/24, and add a VPC subnet route to point the default gateway to an Internet gateway for Internet traffic.
E. Set up the VPC with an RFC 1918 private IP address range (e.g., 10.10.10.0/24), and set the VGW to do a source IP translation of all outbound packets to 11.11.0.0/16.
The IP address range for your on-premises network is 11.11.0.0/16. Inter-server communication is restricted to IP addres
-
answerhappygod
- Site Admin
- Posts: 899604
- Joined: Mon Aug 02, 2021 8:13 am
The IP address range for your on-premises network is 11.11.0.0/16. Inter-server communication is restricted to IP addres
Join a community of subject matter experts. Register for FREE to view solutions, replies, and use search function. Request answer by replying!