As a consultant engineer, you are given a slope design task. A cut slope was excavated in a saturated clay with a slope

[answerhappygod]

As A Consultant Engineer You Are Given A Slope Design Task A Cut Slope Was Excavated In A Saturated Clay With A Slope 1 (26.72 KiB) Viewed 33 times

As a consultant engineer, you are given a slope design task. A cut slope was excavated in a saturated clay with a slope angle, β=35∘, with the horizontal. Previous soil explorations showed that a rock layer was located at a depth of 15 m below the ground surface. Assuming an undrained condition and γ= 18.7kN/m3 and the undrained cohesive value, cu​=75kN/m2: Assume D= 1.5. The task is given as follow;