As in the figure below, a hole is to be punched out of a plate having a shearing strength of 20 MPa. The compressive str
Posted: Thu Jul 14, 2022 2:54 pm
As in the figure below, a hole is to be punched out of a platehaving a shearing strength of 20 MPa. The compressive stress in thepunch is limited to 300MPa. (a) Compute the maximum thickness ofplate in which a hole 70 mm in diameter can be punched. (b) If theplate is 15 mm thick, determine the diameter of the smallest holethat can be punched.
Strength of materials
Strength of materials