look for the box all informations and Dimensions

Post by **answerhappygod** » Tue Apr 26, 2022 1:44 pm

: Look For The Box All Informations And Dimensions 1 (8.86 KiB) Viewed 28 times

: Look For The Box All Informations And Dimensions 2 (52.27 KiB) Viewed 28 times

: Look For The Box All Informations And Dimensions 3 (32.12 KiB) Viewed 28 times

Team A(m.) 2.3 B(m.) 3 C(mm.) 3.5 a (m.) b (m.) 0.30 1.1 1 m.) 0.05 E (GPa) 180 Oy (MPa) 250 P(kN) 200 L (n.) 4.0
Task# 1: (15 Marks) A traffic signal pole is subjected to dead loads from signals and signage weights, as shown in photo below. B B Thicknesset Thickness=t W Dia.= a Dia=0.75 a Section 1-1 Section 2-2
Assume the typical weight of every signal = 25 kg, and the signage = 15 kg. Include the self-weight of the pole and the lateral arm (Both are steel pipes). Assume the wind loads as per QCS 2014. Assume the pole is fixed at the base. Make any assumptions required and state them clearly. 1. Draw the Free body diagram for the traffic signal showing different applied loads. 2- Calculate the internal loads on the base of the pole. 3. Find the normal and shear stresses at point W on the base of the pole. 4. Find the principal normal stresses and the maximum shear stress at point w on the base of the pole using stress-transformation equations. 5. Find the principal normal stresses and the maximum shear stress at point W on the base of the pole using Mohr's circle method.