Parallel and Series Circuits In this project, you will be designing circuits using the PHET simulation, and comparing th
-
- Site Admin
- Posts: 899603
- Joined: Mon Aug 02, 2021 8:13 am
Parallel and Series Circuits In this project, you will be designing circuits using the PHET simulation, and comparing th
https://phet.colorado.edu/en/simulation ... ion-kit-dc PART 1: RESISTORS IN SERIES Lab 07 Parallel and Series Circuits.docx Create a circuit using a 9V power supply and three resistors in series of DIFFERENT VALUES. Enter your resistor values below: R1 = R2 = R3= 1. What is the Rof the circuit? 2. What is the CALCULATED I ? (You must show your calculations from here on. You can do it total on this document, or you can hand write it and take a photo.) 3. What are the CALCULATED voltage drops across each resistor? 4. Using PHET, build this circuit, insert an ammeter in series with the battery, and 3 voltmeters, (one across each resistor). Take a screenshot and insert it here:
Parallel and Series Circuits In this project, you will be designing circuits using the PHET simulation, and comparing the results that you get on the simulation to those that are predicted using Ohm's Law. Here is the link to our simulation: