2. A steel shaft and an aluminum tube are connected to a steel support and to a rigid disk as shown in the cross section
Posted: Sun Jul 10, 2022 11:46 am
- 2 A Steel Shaft And An Aluminum Tube Are Connected To A Steel Support And To A Rigid Disk As Shown In The Cross Section 1 (10.33 KiB) Viewed 50 times
- 2 A Steel Shaft And An Aluminum Tube Are Connected To A Steel Support And To A Rigid Disk As Shown In The Cross Section 2 (26.06 KiB) Viewed 50 times
determine the maximum torque that can be applied to the disk if the allowable E stresses are 120 MPa. in the steel shaft and 70 MPa. in the aluminum tube. Use Gst = 77 GPa. and Gal = 27 GPa. 76 mm 8 mm 50 mm 500 mm