Page 1 of 1
8) If an Al 6061 rod of diameter = 0.25±0.001 inches is loaded under tension until failure and the failure load recorded
Posted: Sat Jul 09, 2022 11:59 am
by answerhappygod
- 8 If An Al 6061 Rod Of Diameter 0 25 0 001 Inches Is Loaded Under Tension Until Failure And The Failure Load Recorded 1 (18.29 KiB) Viewed 37 times
8) If an Al 6061 rod of diameter = 0.25±0.001 inches is loaded under tension until failure and the failure load recorded using a load cell is 3000 10 lbs. The initial length measured using the extensometer is 2.0 ±0.001 inches and the final length is 2.2 +0.001 inches. Calculate the stress, strain, error in stress and error in strain on the rod (25 points).