A pressure transducer must be connected to a boiler. The selected transducer is linear between 100 psi and 1000psi. Spec

[answerhappygod]

A pressure transducer must be connected to a boiler. Theselected transducer is linear between 100 psi and 1000psi.Specifically, it has the following characteristic: At 100 psi itproduces 10 µV, and at 1000 psi it produces100 µV. The output needs to connected to a0V - 10V meter so that 100 psi will give a reading of 0V and1000 psi a reading of 10V.
Design a suitable interface using OP AMPs that have a maximumclosed-loop gain of 1800 (i.e. each OPAMP has a maximumACL=1800). The closed-loop gain of the firststage should follow this relation: 5X20.
Validate your design using Multisim. Include the Inputvs. Output graph.