Width Thickne 25.05 mm 0.62 mm - 719.5 1 Date Time Hours Longitudinal St Transverse Strain 2 2/3/2022 19:36:45 0 -1.3999

[answerhappygod]

Width Thickne 25 05 Mm 0 62 Mm 719 5 1 Date Time Hours Longitudinal St Transverse Strain 2 2 3 2022 19 36 45 0 1 3999 1 (526.37 KiB) Viewed 34 times

Width Thickne 25.05 mm 0.62 mm - 719.5 1 Date Time Hours Longitudinal St Transverse Strain 2 2/3/2022 19:36:45 0 -1.399999976 -0.400000006 3 2/3/2022 19:38:11 0.0239 -8.100000381 -1.799999952 4 2/3/2022 19:38:12 0.0242 -10 -0.800000012 5 2/3/2022 19:38:13 0.0244 -13.69999981 -1.100000024 6 2/3/2022 19:38:14 0.0247 -10 -1.100000024 7 2/3/2022 19:38:15 0.025 170 -18.70000076 8 2/3/2022 19:38:16 0.0253 474.8999939 -42.79999924 9 2/3/2022 19:38:17 0.0256 467.2000122 -42.09999847 10 2/3/2022 19:38:18 0.0258 472 2000122 -41.90000153 11 2/3/2022 19:38:19 0.0261 467.6000061 -41.59999847 12 2/3/2022 19:38:20 0.0264 471.3999939 -42 13 2/3/2022 19:38:21 0.0267 610.7000122 -64.19999695 14 2/3/2022 19:38:22 0.0269 803.5999756 -90.80000305 15 2/3/2022 19:38:23 0.0272 984.0999756 -116.4000015 16 2/3/2022 19:38:24 0.0275 1146.300049 -139.6000061 17 2/3/2022 19:38:25 0.0278 1324.699951 -163, 1000061 18 2/3/2022 19:38:26 0.0281 1493 -186.8999939 19 2/3/2022 19:38:27 0.0283 1686.699951 -213.5 20 2/3/2022 19:38:28 0,0286 1882.699951 -240.3999939 21 2/3/2022 19:38:29 0.0289 2030.599976 -259.3999939 22 2/3/2022 19:38:30 0.0292 2211.899902 -284.5 23 2/3/2022 19:38:31 0.0294 2375.699951 -305.5 24 2/3/2022 19:38:32 0.0297 2543.199951 -328.8999939 25 2/3/2022 19:38:33 0.03 2796.800049 -362.2000122 26 2/3/2022 19:38:34 0.0303 2888.399902 -373.7000122 27 2/3/2022 19:38:35 0.0306 3051.699951 -395.2000122 28 2/3/2022 19:38:36 0.0308 3218 -419.6000061 29 2/3/2022 19:38:37 0.0311 3408.800049 -443.5 30 2/3/2022 19:38:38 0.0314 3553.199951 -464.2000122 31 2/3/2022 19:38:39 0.0317 3719.399902 -485.8999939 32 2/3/2022 19:38:40 0.0319 3882.5 -506.2999878 33 2/3/2022 19:38:41 0.0322 4042.399902 -527.9000244 34 2/3/2022 19:38:42 0.0325 4206.200195 -548.7999878 35 2/3/2022 19:38:43 0.0328 4374.200195 -571.7999878 36 2/3/2022 19:38:44 0.0331 4598.700195 -600.5 37 2/3/2022 19:38:45 0.0333 4704.899902 -615.5 38 2/3/2022 19:38:46 0.0336 4855.799805 -635.0999756 39 2/3/2022 19:38:47 0.0339 5006.899902 -656 40 2/3/2022 19:38:48 0.0342 5167.600098 -675.5 41 2/3/2022 19:38:49 0.0344 5340 -697.9000244 42 2/3/2022 19:38:50 0.0347 5491299805 42 2/3/2022 19:38:50 0.0347 5491.299805 - 719,5 43 2/3/2022 19:38:51 0.035 5621. 100098 -738.2999878 44 2/3/2022 19:38:52 0.0353 5793 -759.7999878 45 2/3/2022 19:38:53 0.0356 5937.100098 -778.9000244 46 2/3/2022 19:38:54 0.0358 6088.200195 -798.9000244 47 2/3/2022 19:38:55 0.0361 6295.100098 -825.2999878 48 2/3/2022 19:38:56 0.0364 6397.600098 -838.7000122 49 2/3/2022 19:38:57 0.0367 6569 -860 50 2/3/2022 19:38:58 0.0369 6706.5 -878.4000244 51 2/3/2022 19:38:59 0.0372 6876.799805 -899.9000244 52 2/3/2022 19:39:00 0.0375 7016.600098 -918.5 53 2/3/2022 19:39:01 0.0378 7173 -939 54 2/3/2022 19:39:02 0.0381 7327.799805 -957.5 55 2/3/2022 19:39:03 0.0383 7470 -976.5 56 2/3/2022 19:39:04 0.0386 7623.899902 -995.5 57 2/3/2022 19:39:05 0.0389 7765, 100098 -1014.099976 58 2/3/2022 19:39:06 0.0392 7920.700195 -1034.400024 59 2/3/2022 19:39:07 0.0394 8038.799805 -1049.300049 60 2/3/2022 19:39:08 0.0397 8192.799805 -1067.199951 61 2/3/2022 19:39:09 0.04 8326.299805 -1084.900024 62 2/3/2022 19:39:10 0.0403 8471.900391 -1091.900024 63 2/3/2022 19:39:11 0.0406 8678.5 - 1119.199951 64 2/3/2022 19:39:12 0.0408 8756.599609 - 1129 65 2/3/2022 19:39:13 0.0411 8889.099609 - 1144.800049 66 2/3/2022 19:39:14 0.0414 9037.200195 - 1162.5 67 2/3/2022 19:39:15 0.0417 9165.5 - 1179. 199951 68 2/3/2022 19:39:16 0.0419 9311.599609 - 1196.900024 69 2/3/2022 19:39:17 0.0422 9445.799805 - 1212.5 70 2/3/2022 19:39:18 0.0425 9556.5 -1230.099976 71 2/3/2022 19:39:19 0.0428 9700.5 -1247.900024 72 2/3/2022 19:39:20 9842.900391 -1263.300049 73 2/3/2022 19:39:21 0.0433 9974.799805 -1280,5 74 2/3/2022 19:39:22 0.0436 10182 -1304 75 2/3/2022 19:39:23 0.0439 10252 -1312.599976 76 2/3/2022 19:39:24 0.0442 10392 - 1328.400024 77 2/3/2022 19:39:25 0.0444 10517 -1345.300049 78 2/3/2022 19:39:26 0.0447 10641 -1353.599976 79 2/3/2022 19:39:27 0.045 10769 -1368 80 2/3/2022 19:39:28 0.0453 10913 -1384.900024 81 2/3/2022 19:39:29 0.0456 11037 -1398 82 2/3/2022 19:39:30 0.0458 11171 -1412.5 83 2/3/2022 19:39:31 0.0461 11294 -1427.599976 84 2/3/2022 19:39:32 0.0464 11428 -1441.599976 85 2/3/2022 19:39:33 0.0467 1157 -1459.300049 86 2/3/2022 19:39:34 0.0469 11687 -1472.900024 87 2/3/2022 19:39:35 0.0472 11806 -1487.800049 88 2/3/2022 19:39:36 0.0475 11942 - 1502.800049 89 2/3/2022 19:39:37 0.0478 12070 -1518. 199951 90 2/3/2022 19:39:38 0.0481 12268 -1538.599976 91 2/3/2022 19:39:39 0.0483 12325 - 1545.099976 92 2/3/2022 19:39:40 0.0486 12447 0 93 2/3/2022 19:39:41 0.0489 0 0 94 2/3/2022 19:39:42 0.0492 0 0 95 2/3/2022 19:39:43 0.0494 0 96 2/3/2022 19:39:44 0.0497 0 0 97 2/3/2022 19:39:45 0.05 Time Displaceme Force Longitudinal St Transverse Strain (s) | (mm) (kN) (22) (2) 0 0.0478 0.1 -0.00052 0 1 0.0755 0.19 0.01571 -0.00118 2 0.1086 0.3 0.03313 0.00166 3 0.1422 0.41 0.05 0.00508 4 0.1756 0.52 0.06775 0.0058 5. 0.2088 0.63 0.08631 0.00926 6 0.2423 0.74 0.10341 0.01019 7 0.2755 0.85 0.12121 0.01349 8 0.3088 0.96 0.1387 0.01374 9 0.3422 1.07 0.157 0.01753 10 0.3755 1.19 0.17467 0.01703 11 0.4091 1.3 0.19327 0.01552 12 0.4424 1.41 0.21154 0.01525 13 0.4757 1.52 0.2286 0.01643 14 0.5089 163 0.24822 0.01698 15 0.542 1.74 0.26931 0.01524 16 0.5752 1.85 0.28588 0.01778 17 0.6086 1.96 0.30333 0.01526 18 0.6421 2.07 0.32152 0.01701 19 0.6756 2.18 0.33877 0.01525 20 0.7092 2.29 0.35541 0.01695 21 0.7425 2.4 0.37175 0.01862 22 0.7756 2.51 0.39017 0.02546 23 0.8089 2.62 0.40601 0.02536 24 0.842 2.73 0.42135 0.02882 25 0.8752 2.84 0.43807 0.03053 26 0.9087 2.94 0.45563 0.0322 27 0.9421 3.05 0.47063 0.03051 28 0.9755 3.16 0.48693 0.03337 29 1.009 3.27 0.50247 0.03734 30 1.0424 3.38 0.5194 0.03683 31 1.0758 3.48 0.53369 0.03898 32 1.109 3.59 0.55006 0.04415 33 1.1423 3.69 0.56515 0.04408 34 1.1755 3.8 0.58021 0.04702 35 1.2088 3.9 0.5962 0.04912 36 1.2422 4 0.6112 0.05691 37 1.2752 4.11 0.62584 0.04915 38 1.3086 4.21 0.64239 0.05255 39 1.342 4.31 0.65698 0.05263 39 1.342 4.31 0.65698 0.05263 40 1.3755 4.41 0.67126 0.06128 41 1.4092 4.52 0.68816 0.0577 42 1.4425 4.62 0.7022 0.06388 43 1.4759 4.71 0.71698 0.06441 44 1.5091 4.81 0.7305 0.06958 45 1.5421 4.9 0.74461 0.0679 46 1.5753 5 0.75866 0.0662 47 1.6084 5.09 0.77295 0.06937 48 1.6418 5.18 0.78574 0.0711 49 1.6755 5.27 0.80008 0.07797 50 1.7091 5.37 0.81468 0.07796 51 1.7427 5.46 0.82416 0.07796 52 1.7762 5.55 0.83732 0.08136 53 1.809 5.64 0.85138 0.08169 54 1.8421 5.73 0.86577 0.08477 55 1.8753 5.82 0.87666 0.08875 56 1.9085 5.92 0.89252 0.08822 57 1.9418 6.01 0.90601 0.09059 58 1.9754 6.09 0.91859 0.09224 59 2.009 6.18 0.93134 0.09154 60 2.0423 6.28 0.94518 0.09492 61 2.0758 6.37 0.95923 0.09648 62 2.109 6.46 0.97106 0.09867 63 2.1422 6.55 0.98577 0.09823 64 2.1758 6.64 0.99811 0.09916 65 2.2089 6.72 101185 0.09913 66 2.2421 6.8 1.02248 0.10679 67 2.2754 6.89 1.03653 0.10678 68 2.3086 6.98 1.04551 0.1068 69 2.3419 7.06 106085 0.1085 70 2.3753 7.15 1.07356 0.10831 71 2.409 7.24 1.08541 0.11192 72 2.4425 7.32 1.09788 0.11154 73 2.4758 7.41 1.1101 0.1134 74 2.5093 7.49 1.12046 0.11691 75 2.5424 7.58 1.13302 0.11663 76 2.5753 7,66 1.14523 0.11864 77 2.6084 7.75 1.15818 0.11529 78 2.6418 7.83 1.17082 0.11832 79 2.6754 7.92 1.18253 0.12373 80 2.7089 8.01 1.19542 0.12639 80.1 2.7116 4.75 1.19684 0.12539 0.0431 Objective: To manufacture a carbon fibre/epoxy composite plate and obtain the tensile material properties of the composite. Equipment and Materials: PPE, Epoxy Resin, Hardener, Carbon Fibre Woven Fabric, Rollers and Brushes, Mouid, Tensile Test machine. Manufacture of Test Plates 1. Review the COSH/Risk Assessment sheet and sign the accompanying document to confirm that you have read and fully understood the risks and any mitigations 2. Apply PPE supplied (glasses, mask, apron & gloves). 3. Prepare the mould supplied, using the release wax supplied. Apply the wax sparingly over 150mm * 300mm area with a paper towel and polish with a clean towel and then repeat Figure 1- Resin, hardener and release wex. 4. Measure and cut the reinforcement materials to the required size using scissors. (280mm x 100mm) 4 sheets. Ensure that you use the correct materials Figure 2. Carbon Fibre fabric roll Figure 3-Cut plies 5. Weigh out sufficient quantities of resin (50g) and hardener (15g) into the mining cup. Mix thoroughly but do not entrap air bubbles in the mix. Remember the resin has a Gel Time and Pot Life Figure 4-Weighing Resin and Hardener 6. Immediately brush a layer of resin onto the mould surface gel coat) and then add a layer of reinforcement. Use the brush, stipple in some more resin until the reinforcement is fully wetted. Use the laminated rollers to remove any entrapped air. Figure 5. Finished laminate 7. Repeat this process until four layers of reinforcement have been added and then leave to cure at room temperature. 1. Review the Risk Assessment sheet and sign the accompanying document to confirm that you have read and fully understood the risks and mitigations. 2. The samples will be removed from the mould and machined to the size according to BS EN ISO 527. The technical staff will do this for you. 3. Ensure that you are familiar with BS EN ISO 527 prior to testing the samples. Available from UWS library at no cost. 4. Measure and record the sizes of the samples. 5. Place the specimen in the grips. Zero the test machine and apply the load till failure. Note the crosshead speed and ambient conditions. Save the test data for analysis. Note failure mode. Ensure that you obtain all test data from the session. (Photograph the failed specimens.) ii. Utilising BS EN ISO 527 present the test results and from the work undertaken previously discuss the failure of the specimens.