When a router receives an IP packet, but does not find a match in the routing table for the destination IP address, what actions are performed by the router?
A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.
Answer : B
Question 2 ( Topic 1 )
Which of the following statements regarding distance vectors protocols are true?
(Choose two answers).
A. RIPv1, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted beyond the immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant routers and how they interconnect
Answer : A,C
Question 3 ( Topic 1 )
Click the exhibit button.
Routers R1 R2, and R3 are running a classful routing protocol between them. Assuming that router R1 advertises all directly connected networks, how will these networks be represented in router R3's routing table?
A. Router R3's routing table can only contain one of the routes, which will result in route flapping.
B. Router R3's routing table will have one entry for 10.1.1.0/24 and one entry for 10.1.2.0/24.
C. The networks will be represented with one entry of 10.0.0.0/8 in router R3's routing table.
D. The networks will be represented with one entry of 10.0.0.0/24 in router R3's route table.
Answer : C
Question 4 ( Topic 1 )
In an IP datagram, which of the following fields identifies the receiving application?
A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.
Answer : B
Question 5 ( Topic 1 )
Static routing will be used in a network between a corporate head office, with many connected networks, and a branch office, with one connection to the head office. Which of the following best describes the likely configuration?
A. The corporate head office router will have a default route and the branch site will have a more specific static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office router will have a default route.
Answer : D
Question 6 ( Topic 1 )
Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach the network behind router R2?
A. configure router static-route 139.120.121.0/24 next-hop 138.120.199.2
B. configure router static-route 139.120.121.0/24 next-hop 138.120.199.1
C. configure router static-route 138.120.199.2/24 next-hop 138.120.199.1
D. configure router static-route 139.120.121.0/24 next-hop 139.120.121.2
Answer : A
Question 7 ( Topic 1 )
There is an IP host with IP address 10.2.3.1. A static route is created, using the "configure router static-route 10.2.3.0/24 next-hop 10.1.2.1" command. What is the correct traceroute command to test this static route on an Alcatel-Lucent 7750 SR?
A. traceroute 10.2.3.1
B. traceroute 10.2.3.1 next-hop 10.1.2.1
C. traceroute next-hop 10.1.2.1
D. traceroute does not work on the Alcatel-Lucent 7750 SR.
E. traceroute 10.1.2.1
Answer : A
Question 8 ( Topic 1 )
Click the exhibit button.
A static route is created on router R1"using the "static-route 0.0.0.0/0 next-hop 10.3.3.2" command. What command can be used to test the static route on an Alcatel-Lucent 7750
SR?
A. ping static 10.5.5.5
B. ping static 0.0.0.0/0
C. ping 10.5.5.5
D. ping 0.0.0.0
Answer : C
Question 9 ( Topic 1 )
What is the default preference value for a static route in the Alcatel-Lucent 7750 SR?
A. 0
B. 5
C. 10
D. 15
Answer : B
Question 10 ( Topic 1 )
Which of the following statements apply to link state protocol behavior? Choose three answers.
A. Routers broadcast the entire route table to all neighbors.
B. Information about directly connected links is sent to all neighbors.
C. An adjacency database is maintained by each router.
D. The sequence number for an update is incremented as it is flooded from router to router.
E. The topological database is the same for all routers in a single area.
Answer : B,C,E
Question 11 ( Topic 1 )
Click the exhibit button.
What triggers convergence of the routing protocol when the link between switch 1 and switch 2 goes down?
A. Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of Hello timeouts. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converged.
B. Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converged.
C. Convergence will not be triggered because switches cannot run routing protocols between them.
D. Convergence is triggered when the switches notify the routers about the link state information. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converged
E. Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link is down. At this point, both routers R1 and R2 re-compute their link state database and sendupdates to their adjacent routers. Once the process is complete for all routers, the networks have converged.
Answer : A
Question 12 ( Topic 1 )
What are the default Hello and Dead timer intervals for OSPF on the Alcatel-Lucent 7750
SR?
A. 5 and 15 seconds
B. 10 and 30 seconds
C. 5 and 20 seconds
D. 10 and 40 seconds
Answer : D
Question 13 ( Topic 1 )
What causes an adjacency to change from down to two ways?
A. When a link state update is received in response to a link state request.
B. When a router receives a Hello packet that contains its own router ID in the neighbor list from a neighbor.
C. When a router receives a database description packet from a neighbor.
D. When a link state acknowledgement is received in response to a link state update.
Answer : B
Question 14 ( Topic 1 )
Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF.
Assuming that there are no stub networks, which of the following statements regarding type
4 LSA generation is true?
A. Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B. Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C. Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D. Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4 LSA that is flooded to area 2.
Answer : D
Question 15 ( Topic 1 )
Which of the following commands can be used to display the number of SPF computations that have been performed on a router?
A. show router ospf area <area-id>
B. show router ospf neighbor
C. show router ospf interface
D. show router ospf status
Answer : A
Question 16 ( Topic 1 )
Which of the following statements describe the major features of OSPF? Choose two answers.
A. Fast reroute capability
B. Control traffic prioritization
C. Route redistribution
D. Traffic engineering extensions
E. Cut through forwarding
Answer : C,D
Question 17 ( Topic 1 )
Click the exhibit button.
What can you deduce from the show command on router R6?
A. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment. The DR for this segment would be the router with router ID 10.10.10.5.
B. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment; however, this command does not indicate whether 10.10.10.3 or 10.10.10.5 is the DR or BDR.
C. The router R6 interface is in a multi-access segment. It is the BDR, which is why it is not adjacent to the other routers.
D. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment. The DR for this segment would be the router with router ID 10.10.10.3.
Answer : B
Question 18 ( Topic 1 )
Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF.
Howmany type 4 LSAs will be present in the network?
A. One.
B. One for each of the routers in area 0
C. One for each of the external routes exported by router R1.
D. Type 4 LSAs are not generated in this network topology.
Answer : D
Question 19 ( Topic 1 )
Which of the following conditions will prevent an OSPF adjacency from reaching the full state? Choose three answers.
A. MTU mismatch
B. Incorrect subnet mask
C. System interface not included in OSPF
D. Area ID not the same
E. Different metric set on each end of the link
F. Router ID not defined
Answer : A,B,D
Question 20 ( Topic 1 )
Click the exhibit button.
The following command sequence is executed on router R2:
-> A:R2# configure router ospf router-id 10.10.10.99
-> A:R2# configure router router-id 10.10.10.66
On router R1, what router ID appears for router R2 directly after these commands are executed?
A. 10.10.10.99
B. 10.10.10.66
C. 10.10.10.2
D. 10.10.10.1
Answer : C
Question 21 ( Topic 1 )
In an OSPF Hello packet, which of the following fields must match for all neighbor routers on the segment? Choose three answers.
A. Area ID W B.
B. Hello and Dead intervals PC.
C. Stub flag
D. Checksum values
E. The list of neighbors
Answer : A,B,C
Question 22 ( Topic 1 )
Click the exhibit button.
The OSPF adjacency between routers R3 and R1 is down. What is the problem?
A. Area 1 of router R1 should not be configured as a stub.
B. Router R3 has the incorrect authentication key type.
C. Router R1 has the incorrect authentication key type.
D. There is not enough information to tell.
Answer : C
Question 23 ( Topic 1 )
Click the exhibit button.
Given the topology and the show commands, and assuming that router R2 advertises all of its loopbacks into OSPF, what is the correct router R1 configuration?
A. Option A
B. Option B
C. Option C
D. Option D
Answer : A
Question 24 ( Topic 1 )
In which of the following types of areas does an OSPF router not set the E bit in its Type 1
LSA?
A. Not so stubby area
B. Stub area
C. Backbone area
D. Normal area
Answer : B
Question 25 ( Topic 1 )
Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF.
Which of the following statements regarding the OSPF LSAs in the network is true?
A. Router R1 generates a type 5 LSA that is flooded through all OSPF areas.
B. Router R1 generates a type 7 LSA that is flooded through all OSPF areas.
C. Router R1 generates a type 5 LSA that is flooded through area 1. Router R2 generates a type 7 LSA that is flooded through areas 0 and 2.
D. Router R1 generates a type 7 LSA that is flooded through area 1. Router R3 generates a type 5 LSA that is flooded through areas 0 and 2.
Answer : D
Question 26 ( Topic 1 )
What is the protocol number for OSPF in the IP header?
A. OSPF uses TCP, so the protocol number is 6.
B. OSPF uses UDP, so the protocol number is 17.
C. OSPF does not use IP.
D. OSPF has its own protocol number of 89.
Answer : D
Question 27 ( Topic 1 )
Click the exhibit button.
Which of the following would correctly configure routers R2, R3, and R4?
A. Option A
B. Option B
C. Option C
D. Option D
Answer : C
Question 28 ( Topic 1 )
When are virtual links used in OSPF?
A. When two areas need to communicate and there is no area 0.
B. When an area needs to traverse another area to reach area 0.
C. When two areas are connected to area 0, but there is no direct path between them.
D. When an area needs to connect directly to another area without using area 0.
Answer : B
Question 29 ( Topic 1 )
Which of the following statements regarding area border routers in an OSPF network is true?
A. The term backbone router has the same definition as the term area border router.
B. An OSPF network needs at least one area border router to function.
C. Area border routers connect the backbone area to other areas in an OSPF network.
D. By definition, an area border router must perform route summarization between areas.
Answer : C
Question 30 ( Topic 1 )
Which of the following correctly lists the 5 OSPF packet types?
A. Hello, link state update, link state packet, link State acknowledgement, database description.
B. Link state update, link state refresh, link state acknowledgement, database description, notification.
C. Hello, link state refresh, link state update, link state acknowledgement, link state authentication.
D. Hello, link state update, link state request, link state acknowledgement, database description.
Answer : D
Question 31 ( Topic 1 )
Which of the following OSPF area types are supported by the Alcatel-Lucent 7750 SR?
Choose two answers.
A. Not so stubby areas
B. Level1 area WC
C. Stub areas
D. Partially stubby areas
E. Level 2 areas
Answer : A,C
Question 32 ( Topic 1 )
If OSPF is used in a multi-area OSPF network, which of the following statements regarding route summarization is true?
A. Manual route summarization can only be done on autonomous system border routers.
B. Manual route summarization must be done on all the backbone routers to be effective. Manual route summarization is optional on the routers in non-backbone areas.
C. Manual route summarization is done on the ABRs. By default, automatic summarization is done; however, it may not be optimal for all networks.
D. Manual route summarization is done on the ABRs. By default, no route summarization is done and all routes are advertised to all areas.
Answer : D
Question 33 ( Topic 1 )
Click the exhibit button.
The OSPF packets shown have been exchanged between two neighbors. What state is the
OSPF adjacency in?
A. The adjacency state is two way because both routers have received a database description packet.
B. The adjacency is in the exchange state. The next step is to exchange link state request and link state update packets.
C. The adjacency is in the ex start state. The routers have exchanged database description packets, but still have to negotiate the starting sequence number.
D. The adjacency state is full. The routers are exchanging database description packets to notify each other that all link state advertisements have been received.
Answer : C
Question 34 ( Topic 1 )
Which of the following best describes the type of packets used by OSPF routers to exchange updates on a point-to-point link?
A. IP packets sent to an IP multicast address.
B. TCP packets sent to an IP multicast address.
C. IP packets sent to an IP unicast address.
D. UDP packets sent to an IP multicast address.
Answer : A
Question 35 ( Topic 1 )
Which of the following statements best describes an OSPF type 3 LSA?
A. An OSPF type 3 LSA is an intra-area LSA, generated by the ABR only when route summarization is configured.
B. An OSPF type 3 LSA is an inter-area LSA, generated by the ABR only when route summarization is configured.
C. An OSPF type 3 LSA is an inter-area LSA, generated by an ASBR to describe external routes.
D. An OSPF type 3 LSA is an inter-area LSA, generated by the ABR to describe a route to neighbors outside the area.
Answer : D
Question 36 ( Topic 1 )
Which of the following types of networks are supported on an Alcatel-Lucent 7750 SR for
OSPF? Choose two answers.
A. Broadcast
B. Non-broadcast multi-access
C. Point-to-point
D. Point-to-multipoint
Answer : A,C
Question 37 ( Topic 1 )
If routers R1 and R2 have a Level 1 and Level 2 IS-IS adjacency, which of the following statements is true? Choose two answers.
A. Routers R1 and R2 are in different areas.
B. Routers R1 and R2 are in the same area.
C. Routers R1 and R2 will send a Level 1 Hello PDU and Level 2 Hello PDU, if the interface type between them is point-to-point.
D. Routers R1 and R2 will send a Level 1 Hello PDU and Level 2 Hello PDU, if the interface type between them is broadcast.
E. Routers R1 and R2 will send a Level 1/2 Hello PDU if the interface type between them is broadcast.
Answer : B,D
Question 38 ( Topic 1 )
Which of the following is an optional parameter when configuring IS-IS protocol on a router?
A. Configure IS-IS interfaces
B. Enable IS-IS
C. Configure level capabilities
D. Specify an area address
Answer : C
Question 39 ( Topic 1 )
Which of the following features are supported by IS-IS? Choose three answers.
A. PDU authentication.
B. The ability to customize the link cost metric.
C. Use of Bellman-Ford routing algorithm.
D. Classless routing.
E. Updates sent as layer 3 multicast.
Answer : A,B,D
Question 40 ( Topic 1 )
Which of the following statements regarding IS-IS LSPs is true?
A. There are three types of LSPs: L1, L2 and L1/L2.
B. An LSP packet contains the ATT bits and the IS-type bits.
C. The lower the LSP sequence number, the more current the update.
D. Separate databases are maintained for L1 „ L2, and L1/L2 LSPs.
Answer : B
Question 41 ( Topic 1 )
Which of the following statements regarding the IS-IS CSNP is false?
A. CSNPs are used to maintain consistency in the link state database.
B. CSNPs are advertised before an adjacency is formed with another router.
C. There are two types of CSNPs: Level 1 and Level 2.
D. CSNPs are advertised after an adjacency is formed with another router.
Answer : B
Question 42 ( Topic 1 )
Click the exhibit button.
In the IS-IS network shown, router R1 has been configured to summarize network
20.20.1.0/24 and 20.20.2.0/24 as 20.20.0.0/16. Which router's routing table will be reduced compared to the routing table before the summarization?
A. Router R1
B. Router R2
C. Routers R1 and R2
D. Router R4
Answer : B
Question 43 ( Topic 1 )
What value should the AFI be set to for locally administered addressing?
A. 1
B. 49
C. 47
D. 45
E. 39
Answer : B
Question 44 ( Topic 1 )
Click the exhibit button.
For the IS-IS network shown, and assuming point-to-point links, what adjacencies will router R1 establish?
A. L1/L2 adjacency with router R2. L1 adjacency with router R3
B. L2 adjacency with router R2 L1 adjacency with router R3
C. L1/L2 adjacency with router R2 L1/L2 adjacency with router R3
D. L1/L2 adjacency with router R2. L1 adjacency with router R4 L1 adjacency with router R3
Answer : B
Question 45 ( Topic 1 )
Which of the following are similarities between OSPF and IS-IS? Choose two answers.
A. Metric is based on hop count.
B. Slow convergence after link failures.
C. Support hierarchy through the use of areas.
D. Support for CIDR.
E. Link state updates sent using layer 3 multicast.
Answer : C,D
Question 46 ( Topic 1 )
Which of the following statements regarding IS-IS Hello packets are true? Choose two answers.
A. Different types of Hello packets are exchanged on point-to-point networks than on broadcast networks.
B. L1/L2 Hello packets are exchanged on broadcast links.
C. Different L1 and L2 Hello packets are exchanged on broadcast links.
D. By default, Hello packets are sent every 5 seconds, and the timeout to declare a neighbor down is 15 seconds.
Answer : A,C
Question 47 ( Topic 1 )
Which of the following types of network topologies are supported by IS-IS on the Alcatel-
Lucent 7750 SR? Choose two answers.
A. Non-broadcast
B. Broadcast
C. Point-to-multipoint
D. Point-to-point
Answer : B,D
Question 48 ( Topic 1 )
Click the exhibit button.
What is the state of adjacency?
A. Initializing
B. Up
C. Down
D. 2-Way
Answer : C
Question 49 ( Topic 1 )
At what point is the LSP SRM flag cleared when an LSP is sent on an IS-IS point-to-point link?
Choose two answers.
A. As soon as the LSP is transmitted.
B. When an acknowledgment is received in the form of PSNP.
C. When an older LSP is received.
D. When a newer or same aged LSP is received.
E. Only when a newer LSP is received
Answer : B,D
Question 50 ( Topic 1 )
Click the exhibit button.
Given the diagram below, what path will traffic follow from router R6 to router R3, and from router R3 to router R6, if IS-IS is the routing protocol? The numbers beside the links are the metrics for that link.
A. Router R6 to router R3 will follow (R6-R5-R2-R3). Router R3 to router R6 will follow (R3- R2-R5-R6).
B. Router R6 to router R3 will follow (R6-R5-R2-R3). Router R3 to router R6 will follow (R3- R4-R2-R5-R6).
C. Router R6 to router R3 will follow (R6-R5-R2-R3). Router R3 to router R6 will follow (R3- R4-R7-R5-R6).
D. Router R6 to router R3 will follow (R6-R5-R7-R4-R3). Router R3 to router R6 will follow (R3-R4-R7-R5-R6).
Answer : C
Question 51 ( Topic 1 )
When IS-IS elects a DIS, what is used as the tie breaker on an Alcatel-Lucent 7750 SR, if the priorities are the same?
A. The system ID.
B. The loopback address.
C. The sequence number of the Hello packet.
D. The device that first initiated communication becomes the DIS
E. The highest interface MAC address.
Answer : E
Question 52 ( Topic 1 )
Two IS-IS L1/L2 routers are in the same area on the same Ethernet segment. How many adjacencies will be formed between them?
A. None
B. 1
C. 2
D. 3
E. 4
Answer : C
Question 53 ( Topic 1 )
In IS-IS, which of the following statements regarding an L1/L2 router is false?
A. An L1/L2 router can have neighbors in different areas.
B. An L1/L2 router calculates separate SPF trees for the Level 1 and Level 2 topology.
C. An L1/L2 router advertises its L2 routes to its L1 neighbors.
D. An L1/L2 router sets the ATT bit in L1 LSPs to identify itself as an L1 router.
Answer : D
Question 54 ( Topic 1 )
How are IS-IS LSPs sent on point-to-point links?
A. They are sent using multicast MAC addresses 0180
0014.B. They are sent using multicast MAC addresses 0180:c200:0015.
C. They are sent using a unicast address.
D. None of the above.
Answer : C
Question 55 ( Topic 1 )
Given the NSAP address of 49.0012.1234.1234.1234.00, what area does the IS-IS router reside in?
A. 49.0012.1234
B. 49.0012
C. 12.1234
D. 1234
E. 49.1234
Answer : B
Question 56 ( Topic 1 )
Which type of IS-IS router is summarization most likely to be configured on?
A. L1 routers
B. L2 routers
C. L1/L2 routers
D. L1 and L2 routers
Answer : C
Question 57 ( Topic 1 )
Click the exhibit button.
Router R2 advertises the network 192.168.3.0/24 to router R1 via OSPF. A route policy has been constructed to discard the route on router R1; however, it is not working. What is the problem?
A. The prefix list reject should be "192.168.3.0/16 exact".
B. Router R1 should be configured as an OSPF "asbr".
C. The policy "reject" should be set for import rather than export.
D. The policy was likely not "committed" after creation.
E. This is not possible because OSPF cannot use import policies.
Answer : E
Question 58 ( Topic 1 )
Click the exhibit button.
If router R2 redistributes the IS-IS route to 192.168.3.0/24 into OSPF, router R3 preference of these two routes? Choose two answers.
A. The OSPF internal preference
B. The IS-IS Level 1 internal preference
C. The IS-IS Level 2 internal preference
D. The OSPF external preference
E. The IS-IS Level 2 external preference
F. The IS-IS Level 1 external preference
Answer : B,D
Question 59 ( Topic 1 )
An Alcatel-Lucent 7750 SR receives a route via an IS-IS LSP with internal reach ability,
A. The route learned via IS-IS will be installed.
B. The route learned via the OSPF type 5 LSA will be installed.
C. Both routes will be installed, if ECMP is enabled.
D. Both routes will be installed, regardless of whether ECMP is enabled.
Answer : A
Question 60 ( Topic 1 )
Which of the following cannot be used as a matching criterion in route policy statements?
A. Source IP address -
B. TCP source port -
C. Prefix list -
D. Protocol type -
Answer : D Topic 2, Volume B
Question 61 ( Topic 2 )
How many databases does a Link State routing protocol use?
A. One
B. Two
C. Three
D. Four
Answer : C
Question 62 ( Topic 2 )
In an IP datagram, which field identifies the receiving application
A. The protocol field of the transport layer header
B. The port field of the transport layer header
C. The protocol field of the network layer header
D. The port field of the network layer address
Answer : B
Question 63 ( Topic 2 )
A static route is created using the command "static-route 0.0.0.0/0 next-hop 3.3.3.1". What command could be used to test the static route on an Alcatel-Lucent 7750 SR?
A. Ping static 3.3.3.1
B. Ping static 0.0.0.0/0
C. Ping 3.3.3.1
D. Ping 0.0.0.0
Answer : C
Question 64 ( Topic 2 )
A static route is created using the command "static-route 2.3.4.0/24 next-hop 1.2.3.4".
What is the correct traceroute command to test this static route on an Alcatel-Lucent 7750
SR?
A. traceroute 2.3.4.1
B. traceroute 2.3.4.0/24 next-hop 1.2.3.4
C. traceroute next-hop 1.2.3.4
D. traceroute does not work on the Alcatel-Lucent 7750 SR
Answer : A
Question 65 ( Topic 2 )
Which one of the commands below will create a static route to network 2.3.4.0/24 on the
AlcatelLucent 7750 SR router?
A. Static route 2.3.4.0 255.255.255.0 next hop 3.4.5.6
B. Static-route next-hop 3.4.5.6 2.3.4.0/24
C. Static route 2.3.4.0/24 next hop 3.4.5.6
D. Static-route 2.3.4.0/24 next-hop 3.4.5.6
Answer : D
Question 66 ( Topic 2 )
A default route for a client is also known as the:
A. Default path
B. Default gateway
C. Gateway path
D. Proxy ARP
Answer : B
Question 67 ( Topic 2 )
What is the default preference value for a static route in the Alcatel-Lucent 7750 SR router?
A. 0
B. 5
C. 10
D. 15
Answer : B
Question 68 ( Topic 2 )
What command could be used to verify proper configuration of a static route in an Alcatel-
Lucent 7750 SR router?
A. Show route-table
B. Show router routing-table
C. Show router route-table
D. Show static
Answer : C
Question 69 ( Topic 2 )
What address is used when RIPv2 uses multicast to send its updates?
A. 224.0.0.5
B. 224.0.0.6
C. 224.0.0.9
D. 224.0.0.10
E. RIPv2 does not have support for multicast
Answer : C
Question 70 ( Topic 2 )
What is the metric and maximum routable value for RIP?
A. Hop count and 16
B. Hop count and 15
C. Link cost and 15
D. Link cost and 16
Answer : B