ESTABLISHING THE ARTIFICIAL AIRWAY Start off by learning the parts of the two most important artificial airways used to

[answerhappygod]

Establishing The Artificial Airway Start Off By Learning The Parts Of The Two Most Important Artificial Airways Used To 1 (70.15 KiB) Viewed 25 times

ESTABLISHING THE ARTIFICIAL AIRWAY Start off by learning the parts of the two most important artificial airways used to maintain adequate ventilation in most importante polyviny! length murphy a beveled a port, or slot, cut in the side of the tip called a with a connector WORD WIZARD Establishing the Artificial Airway Complete the following paragraph by writing in the correct term(s) in the blank(s) provided. chloride or some other ЕТ tubes are long, semirigid tubes, usually made of type of plastic. A typical ET tube has nine basic parts. The proximal end (sticking out of the mouth) has a standard 15 markings in centimeters. The tube ends --mm adapter. The body of the tube has eye. This slot in a tip. There is that can be inflated to seal the helps ensure gas flow if the tip is obstructed. Just above the tip, a airway to prevent aspiration or provide for -pressure ventilation is bonded to the tube. A small filling tube leads to a balloon. This small balloon has a spring-loaded indicator, or line, is embedded in where a syringe can be attached to allow inflation or deflation. A the wall of the tube body to make it easier to see the tube position on a chest x-ray. tube. Another commonly used tube, inserted through a surgical opening in the trachea, is called a The cannula These tubes are also made of plastic, or occasionally of metal such as forms the primary structural unit of the tube. Like the ET tube, a may be attached near the end to seal the airway. A is attached to the proximal end to prevent slippage and provides a means to secure -mm cannula with a standard the tube to the neck. Many tubes have a removable has a rounded blunt adapter. This cannula can be removed for cleaning. A special device called an end and is used to facilitate insertion ET TUBES