Please solve 1-2 in full details. Thanks 1) Calculate average velocity in the flow channels for both sides, assuming flo

[answerhappygod]

Please Solve 1 2 In Full Details Thanks 1 Calculate Average Velocity In The Flow Channels For Both Sides Assuming Flo 1 (47.93 KiB) Viewed 60 times

Please solve 1-2 in full details. Thanks 1) Calculate average velocity in the flow channels for both sides, assuming flow is equally divided among all available channels. 2) What is the length of flow and cross-sectional flow area for pressure drop purpose on water side? Given: e. A counter flow plate heat exchanger is being used as regeneration section of a HTST to heat raw (unpasteurized) milk with hot pasteurized milk. The heat exchanger contains 41 plates. Each plate is 1.52 m high and 0.6 m wide. The gap between the plates is 3 mm. The raw milk at 20°C enters the heat exchanger at a rate of 2.5 kg/s. The hot milk counter currently enters at 75°C. In given temperature range, physical properties of milk are provided in table below: Property Viscosity, Pas Thermal conductivity, W/m°C Heat capacity, 1/Kg C Density, kg/m At 75 "CAt 20 "C 0.001 0.003 0.64 0.56 3900 3900 1030 1030 RAW MIT deg! HOT MIX OUTPUT HOT MIT W ME OUT, T- 2120