PLEASE DO IT IN LOGISIM Develop and implement a "copying schematic design* between two 4-bit registers. In order to impl

[answerhappygod]

PLEASE DO IT IN LOGISIM
Develop and implement a "copying schematic design* between two 4-bit registers. In order
to implement a source bank, you need 4 4-bit registers, and the destination bank must be
another 4 4-bit registers. Any register in the source bank must be transferred to the corresponding destination bank using a bus mechanism, i.e. register 1 in the source should be transferred to register 1 in the destination.
TASK
Develop and implement a "copying schematic design* between two 4-bit registers. In order
to implement a source bank, you need 4 4-bit registers, and the destination bank must be
another 4 4-bit registers. Any register in the source bank must be transferred to the corresponding destination bank using a bus mechanism, i.e. register 1 in the source should be transferred to register 1 in the destination.
question 5 Develop and implement a "copying schematic design* between two 4-bit registers. In order to implement a source bank, you need 4 4-bit registers, and the destination bank must be another 4 4-bit registers. Any register in the source bank must be transferred to the corresponding destination bank using a bus mechanism, i.e. register 1 in the source should be transferred to register 1 in the destination. TASK Develop and implement a "copying schematic design* between two 4-bit registers. In order to implement a source bank, you need 4 4-bit registers, and the destination bank must be another 4 4-bit registers. Any register in the source bank must be transferred to the corresponding destination bank using a bus mechanism, i.e. register 1 in the source should be transferred to register 1 in the destination.