As shown in the figure below, we want to send water to a place 200m away through a water pipe. The gauge pressure at the inlet of the pump used to send water is 1 kPa. It is assumed that the diameter of the water pipe is D = 50 mm, the flow is at a steady state, and the negative losses associated with the elbow and outlet losses are neglected. Assume that the density of water is 1,000 kg/m3 and that the roughness of the inside of the pipe is e = 0.05 mm.
The head increased by the pump is 1.31 m2/s2 (Dhpump=0.27 m2/s2) Calculate the flow value (Q) of the water pipe in this case.
As shown in the figure below, we want to send water to a place 200m away through a water pipe. The gauge pressure at the
-
answerhappygod
- Site Admin
- Posts: 899604
- Joined: Mon Aug 02, 2021 8:13 am
As shown in the figure below, we want to send water to a place 200m away through a water pipe. The gauge pressure at the
Join a community of subject matter experts. Register for FREE to view solutions, replies, and use search function. Request answer by replying!