Use Tinkercad or any other tool to implement the following project: You have an Arduino, which is connected to: 1- Remot

[answerhappygod]

Use Tinkercad Or Any Other Tool To Implement The Following Project You Have An Arduino Which Is Connected To 1 Remot 1 (45.18 KiB) Viewed 55 times

Use Tinkercad or any other tool to implement the following project: You have an Arduino, which is connected to: 1- Remote Control: One of its buttons will control if the water pump works automatically or Manually. Also, another button will be used to turn the pump on/off during the work in manual mode. 2- A sensor in tankl (above the building) that will measure the level of the water (you can use ultrasonic sensor, or force sensor, or any other suitabl sensor). 3- A nother sensor in tank2 (below the building) to check if this tank is empty or not (you can use force sensor or any other sensor). 4- LCDs to show all the situations of the Smart Tank (e.g. Pump on/off, Automatic/Manual Mode, Tank empty/full...etc.). 5- Alarms (Buzzer) that will work in manual mode if tankl is full and/or tank2 is empty. 6- Any other component you need. In Manual Mode, the user will turn on/off the pump manually. While in automatic mode the pump will turn on/off based on the levels of the water in tankl and tank2.