Page 1 of 1
A wooden beam is fabricated by bolting together three members. The cross-sectional dimensions are shown. The 10-mm-diame
Posted: Sat May 21, 2022 11:28 am
by answerhappygod
- A Wooden Beam Is Fabricated By Bolting Together Three Members The Cross Sectional Dimensions Are Shown The 10 Mm Diame 1 (67.62 KiB) Viewed 11 times
A wooden beam is fabricated by bolting together three members. The cross-sectional dimensions are shown. The 10-mm-diameter bolts are spaced at intervals of s = 170 mm along the x axis of the beam. If the internal shear force in the beam is V = 10.2 kN, determine the shear stress t in each bolt. Assume ba= 27 mm, b2 = 38 mm, da = 82 mm, da = 280 mm. bi b2 d d2 Answer: t = i MPa.