in the figure to a resistor R = 980 Ohm and a source of emf with E
= 18.0 V and negligible internal resistance.
Initially the capacitor is discharged and the switch S
is in position 1. Then the switch is moved to position 2 so that
the capacitor begins to charge. When the switch has been in
position 2 for 10.0 ms, it is brought back to position 1 so that
the capacitor begins to discharge.
- A Capacitor With C 1 50 X 10 5 Is Connected As Shown In The Figure To A Resistor R 980 Ohm And A Source Of Emf With 1 (68.48 KiB) Viewed 44 times
a) The charge of the capacitor
b) The potential difference between the ends of the
resistor and the capacitor immediately before the switch is moved
from position 2 to position 1 again.
c) The potential difference between the ends of the
resistor and the capacitor immediately after the switch is moved
from position 2 to position 1 again.
d) The charge of the capacitor 10.0 ms after the switch
is returned from position 2 to position 1
Interruptor S Interruptors en la posición 1 en la posición 2 S C E R