Air enters and exits a control volume containing an unknown device (machine). You are able to measure the mass flow rate

[answerhappygod]

Air Enters And Exits A Control Volume Containing An Unknown Device Machine You Are Able To Measure The Mass Flow Rate 1 (43.54 KiB) Viewed 51 times

Air enters and exits a control volume containing an unknown device (machine). You are able to measure the mass flow rate of air entering the device, as well as the temperature and pressure at both the inlet and outlet. You are also able to measure the surface temperature of the device. There is a shaft transferring work across the control volume boundary, and there is energy transfer by heat occurring across the boundary that you have measured to be +500kW according to the usual thermodynamics sign convention. a. Using a control volume that corresponds to the outer surface of the machine, write out the three "very important” equations that apply to this control volume. A sketch may help you. b. Make the following assumptions and then simplify the equations from a. above. Kinetic and potential energy effects can be neglected. • The device is operating at steady-state. • The air can be modeled as an ideal gas. • No other fluids are entering or leaving the control volume. c. In the simplified equations from b. above, highlight the values that are known and the values that you could look up. For items d., e., f., and g., if additional relations or equations are required, then write them down. d. Do you have enough information to calculate the work, in kW? Explain. e. Do you have enough information to determine the nature of the process (reversible, irreversible, or impossible)? Explain. f. Do you have enough information to determine what this device is? Explain. g. Do you have enough information to calculate an isentropic efficiency of the device? Explain.