- Lab Note You Can Watch In D2l The Videos Flipflop Microcapmultisim And Flipflop Microcap Multisim Cont That Can Be Use 1 (64.46 KiB) Viewed 55 times
Lab Note: (you can watch in D2L the videos Flipflop MicroCapMultisim and Flipflop MicroCap Multisim_cont that can be useful) this lab, the students will: 1: Implement and simulate a D flip flop in multisim or Microcap, test it with 5V, ground, switches, leds. Using a JK flipflop build the circuit for a D flipflop and test it with inputs 1 and 0, for example input D = 101100101, show the output results. Copy and paste the circuit. In microcap you can simulate the input using a Total Components-> Digital primitives->Stimulus generators->Stimi Build and insert the circuit built in the software and measure the values you need. 2: Implement and simulate a MOD-10 (decade) counter, see next figure, use the clock frequency's so you can see and print the timing diagram output. Depending of JK flipflop CLR and PRE can be 1 or 0. B D CLK CLK CLK CLR nunun
Build and insert the circuit built in the software and measure the values you need. Insert the timing diagram obtained. 3- Turn in a report consisting of a title page, goals of the lab, printed schematic of the circuit and printed simulation timing diagram,, and a conclusion summarizing what you have learned in this lab.