Design a discrete LDO which generates 3.3 V from a 12 V supply. Select a MOSFET which can deliver at least 100 mA (a loa

[answerhappygod]

Design a discrete LDO which generates 3.3 V from a 12 V supply.
Select a MOSFET which can deliver
at least 100 mA (a load resistor can be connected to the output of
the LDO)
Sweep the input voltage from battery from 9 to 12 V and plot the
output voltage
Observe and try to interpret the LDO output voltage VOUT
Design a discrete DCDC Buck Converter with voltage feedback
which generates 3.3 V from a 12 V
supply. A real MOSFET will be used as a switch. Plot the output
voltage of the DCDC Converter for an
output power of 2.5 W.
To take into account the loss of the inductor, use a series
resistor of 0.5 Ohm in series with the
inductor. Simulate the efficiency of the Buck Converter for an
output power of 2.5 W.
Prepare a short report summarizing the properties of digital and
analog isolators: optical, inductive and
capacitive
Explain in a few sentences why electrical creepage and clearance
are important