Page 1 of 1
b) If the beam in part a) has the cross-sectional profile as shown below and a Young's Modulus, E, of 70GN/m², calculate
Posted: Mon May 09, 2022 9:10 am
by answerhappygod
- B If The Beam In Part A Has The Cross Sectional Profile As Shown Below And A Young S Modulus E Of 70gn M Calculate 1 (47.57 KiB) Viewed 25 times
b) If the beam in part a) has the cross-sectional profile as shown below and a Young's Modulus, E, of 70GN/m², calculate the magnitude of the deflection at 1.1m from the left hand side. 15 10 GI 5 55 A 40 Figure 4.2 (All dimensions in mm, wall thickness is 5mm) c) What is the value of stress at point A in Fig. 4.2 at a point 1.1m from the left hand side of the beam?