Design a 4-bit multiplier and verify using only Verilog simulation. The multiplier takes two 4-bit unsigned numbers as i

[answerhappygod]

Design a 4-bit multiplier and verify
using only Verilog
simulation. The multiplier takes two 4-bit unsigned
numbers as inputs and produces an 8-bit number as an output. For
the design, you can use a 4-bit ripple carry adder.
(1) Draw a schematic of your circuit. You can use
4-bit adders as a block.
(2) Complete the mul4b module in the given Verilog code.
You can use 4-bit adders in the given code. Provide your code for
mul4b.
(3) Perform the simulation and provide the screen
capture of the outputs.
NB > Provide the screen capture of your "Verilog"
code. use only Verilog!!!!!!!!!!