The Pinion Of A Helical Gear Pair Of Normal Module 5 Mm Is Supported In Bearings Equally Spaced On Either Side Of The C 1 (102.41 KiB) Viewed 17 times
The Pinion Of A Helical Gear Pair Of Normal Module 5 Mm Is Supported In Bearings Equally Spaced On Either Side Of The C 2 (103.15 KiB) Viewed 17 times
The pinion of a helical gear pair of normal module 5 mm, is supported in bearings equally spaced on either side of the centre line of the gear. The pinion has 19 teeth, and the helix angle is 40 degrees. If the speed of the pinion is 1064 rev/min and 75kW is being transmitted, find the end thrust on the pinion shaft in KN. Assume that the end thrust is carried by a separate thrust bearing. Give your answer to 2dp.
The pinion of a helical gear pair, similar to that in Q5, with a normal module of 4 mm and a normal pressure angle of 20°, is supported in bearings equally spaced on either side of the centre line of the gear. The pinion has 23 teeth, and the helix angle is 40 degrees. If the speed of the pinion is 1114 rev/min and 75kW is being transmitted, find the radial load supported by one of the bearings in kN. Give your answer to 2dp.
Join a community of subject matter experts. Register for FREE to view solutions, replies, and use search function. Request answer by replying!