Routers R1 and R2 are on the same network segment, and both routers use interface GigabitEthernet0/0. If R1 loses communication to R2, which two items should you check as you begin troubleshooting? (Choose two.)
A. Verify that R2 is using 802.1q encapsulation.
B. Verify that the GigabitEthernet0/0 interfaces on R1 and R2 are configured with the same subnet mask.
C. Verify that the R1 GigabitEthernet0/0 interface is up and the line protocol is down.
D. Verify that R1 and R2 both are using HDLC encapsulation.
E. Verify that the R1 GigabitEthernet0/0 interface is up and the line protocol is up.
Routers R1 and R2 are on the same network segment, and both routers use interface GigabitEthernet0/0. If R1 loses commun
-
answerhappygod
- Site Admin
- Posts: 899604
- Joined: Mon Aug 02, 2021 8:13 am
Routers R1 and R2 are on the same network segment, and both routers use interface GigabitEthernet0/0. If R1 loses commun
Join a community of subject matter experts. Register for FREE to view solutions, replies, and use search function. Request answer by replying!