There are two R80.X0 Security Gateways in the Firewall Cluster. They are named FW_A and FW_B. The cluster is configured to work as HA (High availability) with default cluster configuration. FW_A is configured to have higher priority than FW_B. FW_A was active and processing the traffic in the morning. FW_B was standby. Around 1100 am, its interfaces went down and this caused a failover. FW_B became active. After an hour, FW_A's interface issues were resolved and it became operational. When it re-joins the cluster, will it become active automatically?
A. No, since ג€maintain current active cluster memberג€ option on the cluster object properties is enabled by default
B. No, since ג€maintain current active cluster memberג€ option is enabled by default on the Global Properties
C. Yes, since ג€Switch to higher priority cluster memberג€ option on the cluster object properties is enabled by default
D. Yes, since ג€Switch to higher priority cluster memberג€ option is enabled by default on the Global Properties
There are two R80.X0 Security Gateways in the Firewall Cluster. They are named FW_A and FW_B. The cluster is configured
-
answerhappygod
- Site Admin
- Posts: 899604
- Joined: Mon Aug 02, 2021 8:13 am
There are two R80.X0 Security Gateways in the Firewall Cluster. They are named FW_A and FW_B. The cluster is configured
Join a community of subject matter experts. Register for FREE to view solutions, replies, and use search function. Request answer by replying!