In a co-current flow heat exchanger, what describes best about the characteristic of the temperature? A. Exit fluid for

[answerhappygod]

In A Co Current Flow Heat Exchanger What Describes Best About The Characteristic Of The Temperature A Exit Fluid For 1 (65.3 KiB) Viewed 36 times

In a co-current flow heat exchanger, what describes best about the characteristic of the temperature? A. Exit fluid for both cold stream and hot stream become close to each other B. Cold fluid exit the heat exchanger at higher temperature C. Hot fluid exit the heat exchanger at lower temperature D. Heat from the hot fluid transferred to the cold fluid inside the heat exchanger Double effect evaporation unit is widely used in industry, lists below is the possible application of these system except A. Production of sugar, in reducing the moisture content in mother liquor B. Pulp mill in reducing the water content in the pulp sludge C. Production of salt from sea water where large amount of water shall be removed D. To change the fresh milk in liquid form to powder form The equipment consists of concentric heat exchanger is insulated. The thermometers are installed in both the inside and outside tubes, to measure the fluid temperature accurately. To minimize losses in the system, A. the cold water is fed through the inner pipe, while the hot water in the outer annulus B. the hot water is fed through the inner pipe, while the cold water in the outer annulus C. Thermometer are installed in each pipe line. D. Flow meters are installed in each pipe line. The functionality of water distributor in the cooling tower is as follows except,