b. Draw the free body diagram of the shafts AB and CD. Label allthe unknown reaction forces.
- A Given The Directions Of Input And Output Torque Draw The Free Body Diagram Of Gears G1 And G2 Indicating The Locatio 1 (442.92 KiB) Viewed 13 times
A, B, C, D, E and F are all pin joints. The force acts at thecenter of the plate. The links are rigid.
a. Given the directions of input and output torque, draw the free body diagram of gears G1 and G2 indicating the location and the direction of the tangential and normal (radial) components of forces acting on each gear. b. Draw the free body diagram of the shafts AB and CD. Label all the unknown reaction forces. c. Write the equilibrium conditions for shaft AB and verify if the system is statically determinate. Assume that the normal force component at the gear and the required dimensions are all known. 4. Determine whether the rectangular plate is completely or partially constrained. A, B, C, D, E and F are all pin joints. The force acts at the center of the plate. The links are rigid.