A drive is desired for 1,500 W, 200 rpm drive shaft to 70 rpm driven shaft to operate at 11—16 h/day and at a center dis

[answerhappygod]

A drive is desired for 1,500 W, 200 rpm drive shaft to 70 rpmdriven shaft to operate at
11—16 h/day and at a center distance of approximately 80 mm,with light shock load and with drip
lubrication. Find the following:
a.) Speed ratio
b.) Service factor
c.) Design power
d.) Module and number of teeth of driving gear
e.) Number of teeth of driven gear
f.) Center distance
g.) Gear selection