Let us design the Car Washing system with the following three basic steps. 1 When a car comes on the Belt (moving), a se

[answerhappygod]

Let Us Design The Car Washing System With The Following Three Basic Steps 1 When A Car Comes On The Belt Moving A Se 1 (1.23 MiB) Viewed 31 times

Let us design the Car Washing system with the following three basic steps. 1 When a car comes on the Belt (moving), a sequence has to be followed automatically. Its steps are: my 1) Soaping, 2) Washing, 3) Drying A F M2, P2 RI During the first step of Soaping, the controller operates the pump to apply soap. Once the fixed time is completed, the second step is the washing car. The pump is activated for this purpose and one motor operates a brush to scrub the car with soap. The next step is to dry the car and for that let us use the fix-time again. The fan will be activated for drying purposes. Finally, the conveyor belt takes the car to the end exit. As soon as the limit switch detects the Car at the end, the Car washing process is completed. Put additional manual on/off buttons to stop or turn it on, when required. 1. Explain the logic sequence of Automatic Car Washing, by steps or by a flow chart. 2. Write the PIC C code with the comment on each instruction. 3. Draw an interfacing diagram or block diagram of all required components for the above objective.