Q6. The beam is pin-supported at A, and supported by a roller at B. The lengths P are ₁ 13.4 m and /2 = 2.7 m. The cross

[answerhappygod]

Q6 The Beam Is Pin Supported At A And Supported By A Roller At B The Lengths P Are 13 4 M And 2 2 7 M The Cross 1 (55.73 KiB) Viewed 41 times

Q6. The beam is pin-supported at A, and supported by a roller at B. The lengths P are ₁ 13.4 m and /2 = 2.7 m. The cross section is shown in the image with h= 232 mm. It is subjected to a linearly distributed load with maximum load intensity w= 270 N/m, and couple moment M = 4.1 kN-m. Determine the absolute maximum transverse shear stress (in the unit of the kPa) in the beam at the critical section. W Answer M 50 mm 50 mm -100 mm- 50 mm C 4₁ Please pay attention: the numbers may change since they are randomized. Your answer must include 1 place after the decimal point. Your Answer: h