- A Company Is Located In A 2 Floor Building And Has A Lan That Interconnects Users In The Building The Lan Specification 1 (173.84 KiB) Viewed 27 times
(PREFERABLY CONFIGURATIONS FROM CISCO PACKET TRACER). THANKS!
A company is located in a 2-floor building and has a LAN that interconnects users in the building. The LAN specifications are as follows: . O There are 5 VLANs, each for one of the departments: Production, Sales, HR, Management and IT. Each VLAN has the following no. of users: Production: 20 IT: 8 o Sales: 4 HR: 4 o Management: 4 O O . o O . . The Vlan 99 will be used as the native VLAN Three switches are used to interconnect the users: o Floor-1: located in the first floor and has 24 fast Ethernet ports and 2 Gigabit Ethernet ports Floor-2: located in the Second floor and has 24 fast Ethernet ports and 2 Gigabit Ethernet ports Main: located in the first floor and has 24 Gigabit Ethernet ports The port G0/1 on Floor-1 & Floor-2 Switches are connected to ports on the Main Switch. The ports G0/21-23 on the Main Switch are used for connections to the Floor switches. Port G0/24 on the Main switch is connected to the port G0/0 on a router, Central-Router, located in the first floor. The Central-Router will be used to provide interconnection between different VLANs (InterVLAN Routing) The ports on Floor-1 & Floor-2 Switches are assigned to different VLANs and as follows: Ports fa0/1-12 → Production o Port fa0/13-15 → Sales Port fa0/16-18 → HR o Port fa0/19-21 → Management Port fa0/22-24 → IT The ports G0/1-20 on the Main Switch are assigned to the IT VLAN O O .
Use the IP block 192.168.20.0/25 Deliverables: Please provide the following: a. 1. The subnet address, mask and range of usable addresses for each subnet 2. The IP addresses that you will assign to Floor-1, Floor-2, Main switch and the Central-Router. These IP addresses have to be selected from the subnet IP block assigned to IT VLAN. 3. VLAN numbers 4. The required configuration for Floor-1 switch: Switch name b. Console, Telnet and Privileged mode passwords Switch IP address and default gateway d. VLAN configuration Port assignment to VLANs 5. The required configuration for the Main switch 6. The required configuration for the Central-Router 7. A network diagram, using Visio, or any other professional network diagram application, that shows the logical topology of this network c. e.