Task 2 Perform simulation and practical tests on the circuit in figure 1 and 2 to determine their suitably for an applic

[answerhappygod]

Task 2 Perform Simulation And Practical Tests On The Circuit In Figure 1 And 2 To Determine Their Suitably For An Applic 1 (30.01 KiB) Viewed 26 times

Task 2 Perform Simulation And Practical Tests On The Circuit In Figure 1 And 2 To Determine Their Suitably For An Applic 2 (13.77 KiB) Viewed 26 times

Task 2 Perform Simulation And Practical Tests On The Circuit In Figure 1 And 2 To Determine Their Suitably For An Applic 3 (17.12 KiB) Viewed 26 times

Task 2 Perform Simulation And Practical Tests On The Circuit In Figure 1 And 2 To Determine Their Suitably For An Applic 4 (30.52 KiB) Viewed 26 times

Task 2 Perform simulation and practical tests on the circuit in figure 1 and 2 to determine their suitably for an application of your choice (most be related to the scenario) using available software package and components. Then analyse and compare the results obtained from testing the circuits. To begin with, select at least two semiconductors from the figures and identify relevant literature for testing them using appropriate manufacturers' data sheets. Then apply at least two different testing procedures (using diode theory) to test the semiconductor components in order to interpret relevant information (e.g forward bias resistance, breakdown voltage, operating frequency etc) from manufacturer's data sheets. Your report must contain detail description of the circuits from input to output with annotated diagrams, snapshots of simulated/built circuit, calculation, assumption and link with manufacturer datasheet.
V1 240Vrms ~50Hz 0° T1 000000 turviv 20:1 A D1 3N247 B +6 C1 47µF Figure-1 DC Power Supply Circuit R1 ww 6800 5% с D2 BZX85-C6V2
V1 50mVpk 100Hz 0° A C1 →F 100μF C2 →F 100μF R1 10kQ2 D1 1N4007G D2 1N4007G R2 10k2 с D E VCC Figure-2 BJT Push-pull Amplifier 15V Q1 BC108BP F Q2 BC557AP C3 He 1mF B [RL 160
LO3 P5 Examine the operation and Examine types of application of oscillators M3 D3 Assess the performance Analyse the results available oscillators and characteristics of types of obtained from applying their applications. oscillators. practical and virtual tests on oscillators studied. LO4 Apply testing procedures to electronics devices and circuits. P6 Select suitable electronic devices and their parent circuit and identify the appropriate manufacturer's data sheet. P7 Interpret relevant information from manufacturer's data when testing electronic devices and circuit. M4 Perform tests on electronic devices and circuit, recording results and recommending appropriate action. D4 Analyse and compare the results from applying practical and virtual tests on devices and circuits studied.