Lab Task #1 You are a detective. You have received the latest intelligence data on the target. The messages might have c

[answerhappygod]

Lab Task #1
You are a detective. You have received the latest intelligence data on the target. The messages might have changed unintentionally when traveling through the network. You must implement CRC-3 to discover if the data you've obtained is error-free. Your polynomial is x^3 + x + 1. Each message is at most 29 bits long. Good luck!
This is what you are given:
The variable polynomial is the decimal representation of x^3 + x + 1. The array data contains information about latitude, longitude, and elevation of the target. The array crc contains the original calculated CRC-3 for the data.
Go through the data array and calculate the CRC-3 for each item in the array. Compare your calculation with the provided one in the crc array. Print [OK] or [FAILED] accordingly. If the calculations do not match, print the calculated CRC and expected CRC. Print the steps required to get to the calculated CRC.
In order to calculate the CRC-3 we are going to create a function crc3(). This function returns the check value of the CRC-3. We use printSteps to aide in our debugging. When set to true, it prints the binary steps.
The following function prototype is given:
Example output is shown below for reference.