This Ling 1. Examine the following situation. Scenario: You work as an electronic tech responsible for the maintenance a

[answerhappygod]

This Ling 1 Examine The Following Situation Scenario You Work As An Electronic Tech Responsible For The Maintenance A 1 (75.48 KiB) Viewed 22 times

This Ling 1. Examine the following situation. Scenario: You work as an electronic tech responsible for the maintenance and modification of a manufacturing line. Your company is experiencing quality problems on a line that assembles cabinets with magnets to hold the doors closed. Workers are having a high rate of not installing the magnets. Your job is to design a circuit that will sense when a magnet is missing on a cabinet and stop the conveyor line and turn on an LED that signals the defect. General Instructions: • Design the circuit simulation to operate with the Speed/Power Control panel on the left-hand side of the trainer and Discrete Sensor Panel on the right. • Use the Hall Effect sensor to sense the existence of the magnet. This is the only sensor that will sense a magnet. Use the motor on the Speed/Power Control Panel as the conveyor motor. • Use the N.C. pushbutton as the inspection limit switch that indicates when the magnet is in range. • Use the toggle switch for On/Off and the N.O. button for start. . • Drive solid state relay I with the output of the sensor. • The conveyor should start when the toggle switch is on and the start button is pressed. When the N.C. pushbutton is activated, the conveyor should continue running if a magnet is within range of the Hall Effect sensor. . When the N.C. pushbutton is activated, the conveyor should stop running and the LED turn on if a magnet is not within range of the Hall Effect sensor. Hint: Also use the mechanical relay.