A. Write the commands as you will enter in the loS starting from the User Executive mode to give the switches their name

[answerhappygod]

A Write The Commands As You Will Enter In The Los Starting From The User Executive Mode To Give The Switches Their Name 1 (64.52 KiB) Viewed 23 times

A. Write the commands as you will enter in the loS starting from the User Executive mode to give the switches their names. configure terminal (4) (3) B. Write the commands to setup the switches to prevent unwanted DNS lookups. ap de look up C. Configure local console and VTY passwords on either one of the switches. by t D. Configure a login MOTD banner message on either one switches. (6) (3) E. Configure and activate both interfaces on each switch. (6) de F. Configure an interface description on either one of the switches indicating which device is connected to it. (3) cably Question 4 t fa VLAN 1 Alde 192.168.20.0 A. 24 255.255.255.0 Host IP Address: Original Subnet Mask New Subnet Mask: Fill out the tables below with appropriate answers given the IPv4 address, original subnet mask, and new subnet mask. Given: Find: ell nifie VLAN 1 is 13.2.1 br. 25.6 AL Kudd sa Number of Subnet Bits Number of Subnets Created Number of Host Bits per Subnet Number of Hosts per Subnet Network Address of this Subnet IPv4 Address of First Host on this Subnet IPv4 Address of Last Host on this Subnet IPv4 Broadcast Address on this Subnet 20 155.255.2553 192.168.200.139 255.255.255.0 255.255.255.224