1) 2x4,2x8, and 2x12 all refer to the dimensions of standard sizes of dimensional lumber 2) Due to the quantity and dist

[answerhappygod]

1 2x4 2x8 And 2x12 All Refer To The Dimensions Of Standard Sizes Of Dimensional Lumber 2 Due To The Quantity And Dist 1 (131.33 KiB) Viewed 65 times

1) 2x4,2x8, and 2x12 all refer to the dimensions of standard sizes of dimensional lumber 2) Due to the quantity and distribution of nails, the connections found in conventional light wood framing have been described as a. technocratic b. democratic c. autocratic d. aristocratic is anchored to the top of the foundation and a 3) In a typical light wood framing system, a is located at the base of a stud wall. a. rafter; joist b.header; sill c. top plate; bottom plate d. sill plate; sole plate c 4) What is the actual depth of a 2x8? a. 7 inches b. 7-1/2 inches c. 7-1/4 inches O d. 8 inches 5) Structural panels laminated from solid lumber in layers with the orientation of each layer perpendicular to the one above or below are known as a. wood l-joists b.oriented strand board (OSB) c. cross-laminated timber(CLT) d. glue-laminated wood (glulam) 6) Which of the following statements about cast iron and steel is true? a. cast iron contains less carbon than steel b. the structural properties of cast iron are vastly superior to those of steel c. cast iron contains more impurities (such as phosphorous, sulfur, and oxygen) than steel d. steel was used widely as a structural material before the use of cast iron 7) Which of the following architects innovated the platform frame in ways that allowed for controlled differences in section between volumes of space and roof planes? a. Rudolph Schindler b. Frederick Fisher cc. Erin Besler d. John Lautner