(Figure 1).
Specify the orientation of the element with the maximum in-plane
stress.
θs1, θs2
- The State Of Stress At A Point Is Shown On The Element In Figure 1 Specify The Orientation Of The Element With The Ma 1 (5.17 KiB) Viewed 76 times
The state of stress at a point is shown on the element in (Figure 1). Specify the orientation of the element with the ma
-
answerhappygod
- Site Admin
- Posts: 899603
- Joined: Mon Aug 02, 2021 8:13 am
The state of stress at a point is shown on the element in (Figure 1). Specify the orientation of the element with the ma
The state of stress at a point is shown on the element in
(Figure 1).
Specify the orientation of the element with the maximum in-plane
stress.
θs1, θs2
60 MPa 30 MPa 45 MPa
(Figure 1).
Specify the orientation of the element with the maximum in-plane
stress.
θs1, θs2
60 MPa 30 MPa 45 MPa