Experiment Procedures Build the circuit as shown in Figure 1 by using Multisim Electronics Workbench. Vcc 20V RC Z2kohm

[answerhappygod]

Experiment Procedures Build The Circuit As Shown In Figure 1 By Using Multisim Electronics Workbench Vcc 20v Rc Z2kohm 1 (63.76 KiB) Viewed 26 times

Experiment Procedures Build the circuit as shown in Figure 1 by using Multisim Electronics Workbench. Vcc 20V RC Z2kohm RB 1.5MOhm A 2N3904 A V Figure 1 1. Set the value of Vcc= 20 V, Rc = 2k2, RB = 1.5 M2 (variable resistor). Record the simulation. value and attach the results from the simulation: *Hints: You can find the amplification factor, ß from the simulation result. В IB = Ic= VCE = 2. Give your conclusions from the result that you obtained. Compare the results from simulation and theoretical value. -Key = a 50%