Mr. Muthu is trying to control a brushed motor to move in two different directions using output pin number 10 and number

[answerhappygod]

Mr Muthu Is Trying To Control A Brushed Motor To Move In Two Different Directions Using Output Pin Number 10 And Number 1 (125.88 KiB) Viewed 47 times

Mr. Muthu is trying to control a brushed motor to move in two different directions using output pin number 10 and number 11 from a microcontroller. He is trying to accomplish the following condition: When output pin number 10 is set to HIGH and output pin number 11 is set to LOW, the motor will be spinning in one direction, and a green lamp will light up. When output pin number 11 is set to HIGH and output pin number 10 is set to LOW, the motor will be spinning in the opposite direction, and a red lamp will light up. When both output pin number 10 and 11 are set to LOW, the motor stops spinning and both lights will be turned off. He has the equipment as follow: a. Microcontroller: 1 unit. b. DC brushed motor: 1 unit. c. Low ampere red lamp: 1 unit. d. Low ampere green lamp: 1 unit. e. 2N2222 transistor: 2 units. f. 5-pin relays: 2 units. g. DC power supply for everything: 1 unit. h. Wire: As much as needed. uC M Low Ampere Red Lamp Low Ampere Green Lamp Mr. Muthu needs your advice on the circuit design. Help him. Sketch the design of your control circuit. t