For the frame shown in Figure 5 below the Moment-Distribution Method or the Slope-deflection Method had been used to fin

[answerhappygod]

For the frame shown in Figure 5 below the Moment-Distribution Method or the Slope-deflection Method had been used to find end moments for the all elements as given below. Positive moments are clockwise.
(a) Find the reactions at all supports and indicate their directions and/or signs
(b) Draw the axial force diagram
(c) Draw the shear force diagram
(d) Draw the bending moment diagram
(e) Draw the deflected shape
(Indicate in the diagrams the signs and the values at the supports and at the joints)

For The Frame Shown In Figure 5 Below The Moment Distribution Method Or The Slope Deflection Method Had Been Used To Fin 1 (25.06 KiB) Viewed 15 times

6m height8m from A to B7m from B to EMAC = +8.91 KN.mMBD = 0MCA = +18.5 KN.mMCD = -18.5 KN.mMDC = +38 Kn.mMDE = -0.675 KN.mMDB = -37.3 KN.mMED = 0
8m from A to B
7m from B to E
MAC = +8.91 KN.m
MBD = 0
MCA = +18.5 KN.m
MCD = -18.5 KN.m
MDC = +38 Kn.m
MDE = -0.675 KN.m
MDB = -37.3 KN.m
MED = 0
Question 5.02 Pue the foame shown in Figures below the Moment-Distribution Method or the Slope Detection Method had been used to find end moments for all elements as given below. Positive Find the reactions at all supports and indicate their directions and or signs Dew the waial force diagram Deas the shear force diagram d) Dew the bending moment diagram Draw the deflected shape more clockwise Iniche di grams and the value the sets and at the joints D Figure 5 My=+891 Nm M-0 M-185 km M-18 SINI Mar.38 kNm Mar-0.675 kNm Mo-39.3 Min-