Use method of sections or method of joints to solve for the following unknowns on the truss system shown in figure 2 bel

[answerhappygod]

Use Method Of Sections Or Method Of Joints To Solve For The Following Unknowns On The Truss System Shown In Figure 2 Bel 1 (27.3 KiB) Viewed 21 times

Use method of sections or method of joints to solve for the following unknowns on the truss system shown in figure 2 below. For tensile members, use A - 500 mm? and for compressive members use A- 400 mm? Use a - 37.3 kN, b = 22,9 kN, 2.1 Axial stress in member CB in MPa. Indicate negative if compressive stress. (10 pts) IN 4 m DEN FIGURE 2