As shown in Figure 1, the 2D frame consists of three members ABGD, CDE and BCHF and is loaded by two vertical forces. Th

[answerhappygod]

As Shown In Figure 1 The 2d Frame Consists Of Three Members Abgd Cde And Bchf And Is Loaded By Two Vertical Forces Th 1 (159.48 KiB) Viewed 16 times

As shown in Figure 1, the 2D frame consists of three members ABGD, CDE and BCHF and is loaded by two vertical forces. The frame is supported by a pin at A and a roller at F. Note that ABG, CDE and FH are horizontal, while the supporting wall, BCH and GD are vertical. The length of DE is 1 = 50(1 + n) mm, where n is the second last digit of your SID number. For example, if your SID number is 501493827 with the second last digit being 2, then 1 = 50(1 + 2) = 150 mm If the weight of all the members and friction can be neglected, (a) draw the free body diagrams of the frame as a whole and each individual member including ABGD, CDE and BCHF in isolation, (b) determine the reaction forces at pin A and roller F, and (c) determine the components of the forces at pin joints B, C and D. 500 - 十。 500 B G 250 A E foto C ID 375 H 4 KN 3 KN F 250 250 1 Dimensions in mm Figure 1