The refrigerant (R-134a) in a vapour compression refrigerant cycle enters the compressor as a dry saturated vapour at a

[answerhappygod]

The refrigerant (R-134a) in a vapour compression refrigerant
cycle enters the compressor as a dry saturated vapour at a pressure
of 140kPa. It is compressed to a pressure of 600kPa and a
temperature of 60°C. On leaving the condenser, the refrigerant has
a dryness fraction of 0.1. The mass flow rate of the refrigerant is
11kg/min. State three (3) assumptions
Draw the p-h and T-s diagram and determine:
(i) Compressor power
(ii) Refrigerant capacity
(iii) Coefficient of performance