Question 4: Using a standard gear system, design a pair of spur gears to connect a 300-hp, 3600-rpm motor to a 600-rpm l

[answerhappygod]

Question 4 Using A Standard Gear System Design A Pair Of Spur Gears To Connect A 300 Hp 3600 Rpm Motor To A 600 Rpm L 1 (87.51 KiB) Viewed 10 times

Question 4: Using a standard gear system, design a pair of spur gears to connect a 300-hp, 3600-rpm motor to a 600-rpm load shaft. Shock loading from the motor and driven machine is negligible. The center distance is to be as small as reasonably possible. A life of 5 years of 2000 hours/year operation is desired, but full power will be transmitted only about 10 percent of the time, with half power the other 90 percent. Likelihood of failure during the 5 years should not exceed 10 percent. Win = 300 hp 3600 rpm 600 rpm